Tweet
Have not tried this using loctite904 on the motor side, always solder that end. Seems like a good idea. especially for older flex shafts with grease on them seems like u can't get all the impurities out. Any input would be greatly appreciated. Thabks mike
-
-
I haven't soldered the end of a flex cable for at least seven years. I use 603 and have never had a cable unwind or loosen. Note that I only use collet flex couplers, never a set screw type.
.ERROR 403 - This is not the page you are looking for
-
I solder them usually, or use loctite 603. Tried with 638 and it was way too thick. Definitely an important step though for when the cable gets crushed down.
This is a cool video that some may find useful definitely want to try it this way this season.Comment
-
Thanks fluid for ur quick reply , i only use that style collet also.Comment
-
Iridebikes247, awesome... Good way to tin big wires also.makes
Me wish i had my mig welder back...Comment
-
I solder them usually, or use loctite 603. Tried with 638 and it was way too thick. Definitely an important step though for when the cable gets crushed down.
This is a cool video that some may find useful definitely want to try it this way this season.
" Sudder "
Wisdom is knowing how little we knowComment
Comment