Possibility of using 2 different ESCs?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • kal1b3r
    Member
    • Oct 2007
    • 38

    #1

    Possibility of using 2 different ESCs?

    would it be possible to use one Pulso 70a Esc and one X-power 70a esc in the same boat with two Ammo 2300kv motors?
    RC boat Noob lol
    http://www.mafiacrime.org/r.php?id=9137
  • jeff180
    Senior Member
    • Jan 2008
    • 150

    #2
    I bet its possible but different escs have more or less range of throttle so
    one could spin the ammo faster or slower than the other even though they
    are parallel with eachother.
    sad

    Comment

    • lonewolf
      Senior Member
      • Jul 2007
      • 658

      #3
      I think it could be possible but.... due to different "throttle curves" you amy get different outputs at the motor. 1 esc will read what the motor is doing differently than the other.... Personally I would run to af the same...

      If one starts outpulling the other it can cause handleing problems and 1 motor will be working harder than the other.. Just my .02 Dave

      Running twins can be enough of a challenge without adding possible issues...
      Twin cat 9xl,... 29 titan 8xl,....37 in mono kb48 8xl.... 42 in twin elc cat project... 42 in gasser cat 260 modded zenoh''' planes and trucks....

      Comment

      • kal1b3r
        Member
        • Oct 2007
        • 38

        #4
        thats what i thought would happen. Does anyone know a webite where i can get a Pulso DLB 70a ESC? please let me know, i really need one
        RC boat Noob lol
        http://www.mafiacrime.org/r.php?id=9137

        Comment

        Working...