FE 21 rigger cuts out

[darryl whitman]

hay guys , I have a jae 21 . 1515 2200kv, 4s dinogys, SF 220 pro +, with a H7 detongued B/S. I set the esc at defalt , LVC 3.0, 8 degree timing,
she runs 6 laps find , the 2nd run she makes 2 laps than cuts out, I come to a stop , then hit the trigger an she goes again , she may do this 1 to 2 more times , then she 's ok for 2 to 3 times , any 1 got any ideas?

[Fluid]

First, set timing at 15 degrees. Odd with the stopping, are the packs fully charged? Do you have data logging? Is it LVC or over Temp?


.

[darryl whitman]

My batts r full charge, I charge them up the night before, an then at the lake I punch them up . the LVC is set at 3.0 volts, (? what you mean by over temp ? ) the esc , batts an motor r just warm to the touch.
I do have a program box for the esc, I'm I missing something ?

[jcald2000]

Are you charging the batt.'s again for the 2nd run, if not that's it.