Tweet
i need a good submerged drive prop for my recovery boat. Needs lots of thrust.. at a low rpm. I'm running a 1500kv 6 pole proboat motor on 2s currently. the graupner 48mm prop im running right now cavitates alot......
-
32" carbon rivercat single 4s 102mph, 27” mini Rivercat 92mph, kbb34 91mph, jessej micro cat(too fast) was -
I guess i should have specified....just need to know what series props i should be looking at. Sounds like a want to buy thread....its not lol32" carbon rivercat single 4s 102mph, 27” mini Rivercat 92mph, kbb34 91mph, jessej micro cat(too fast) was -
here's the chart that shows themComment
-
We use Octura 1400 props on our recovery boats. 2S with an approximate 600 Kv motor and a 1460 prop fully submerged. They work well.
.ERROR 403 - This is not the page you are looking for
Comment
-
2' X 2" sounds fine I can rough reduce it for yaComment
-
this would submerge it for ya....lol
we have a left and right pair...Comment
-
Tunnels-PS295. Cats-H&M M1 Supercat Daytona rivercat. Monos-DF Cyberstorm HiTech 29. Hydros- Ms K Vac-U-Pickle Custom built 37" shovel 10th scale converted to FE Shadow. Rigger-H&M Evo II. AQ Harbortug recovery boat. Build in progress 37" cf DragboatComment
-
The x447's & x452's are great submerged drive props on my villain's. They also double as recovery boats. 1400kv on 2s or 4s and she has plenty of grunt :-) ...Comment
-
^ that's because they're not submerged drives.
Sent from my iPhone using TapatalkThere's a hole at the center of earth where the rest of the world sinks but i stand still...Comment
-
Granted their not setup on the bottom of the hull, but they do swim submerged about 2 3/4" below the stern diving deck so I would call them a submerged drive :-) ...Comment
thats a good one brother....
Comment