Miss Geico 24in 72.3 mph video!!! Coming to the video section tonight!!!

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • msundsd5
    Msundsd Racing/ COE
    • Nov 2013
    • 244

    #1

    Miss Geico 24in 72.3 mph video!!! Coming to the video section tonight!!!

    Fellas,

    I was told that the hull was cheap, won't get anything close to 60 mph with that BS Hull, it's ABS plastic, it's too small, it won't sit down and ride, it's to light, that's just a bad decision for a fun boat.... Well, I guess the "Haters" were wrong......Video will be up in the Video section by end of tonight, if you have any feedback on the runs please feel free to share any on here. Needless to say I have been told and know that for this size Hull to ride like it is is some really good stuff so I am excited. Thanks
    Lot Boyz Racing and Marine Team...Get Hype!
    CF Shocker Twin - 93.4mph / CF Daytona Single - 80.2mph
    FG Shocker Single - 98.3mph / Miss Geico 24" Single - 72.3mph
  • ray schrauwen
    Fast Electric Addict!
    • Apr 2007
    • 9471

    #2
    Sounds good. I wish I grabbed one when they were dirt cheap. They seem to be a hot commodity right now.
    Nortavlag Bulc

    Comment

    • kfxguy
      Fast Electric Addict!
      • Oct 2013
      • 8746

      #3
      That's sick fast. If it flipped.....it dont count!
      32" carbon rivercat single 4s 102mph, 27” mini Rivercat 92mph, kbb34 91mph, jessej micro cat(too fast) was

      Comment

      • msundsd5
        Msundsd Racing/ COE
        • Nov 2013
        • 244

        #4
        Video is up!!! Enjoy.........

        http://forums.offshoreelectrics.com/...203#post587203
        Lot Boyz Racing and Marine Team...Get Hype!
        CF Shocker Twin - 93.4mph / CF Daytona Single - 80.2mph
        FG Shocker Single - 98.3mph / Miss Geico 24" Single - 72.3mph

        Comment

        • ray schrauwen
          Fast Electric Addict!
          • Apr 2007
          • 9471

          #5
          Not finding your setup??
          Nortavlag Bulc

          Comment

          • ray schrauwen
            Fast Electric Addict!
            • Apr 2007
            • 9471

            #6
            From my best screen shot it's a Tacon motor either 36mm or 40mm diameter?? The esc is a T180 and batts?? You are also using the BJ29 offset hardware.

            What Kv are you running? 36mm or 40mm motor??
            Nortavlag Bulc

            Comment

            Working...