Tweet
Hi all. I've always noticed a small pin hole on the top of the strut at the back of it. I've never thought much of it but I would like to ask the question, why is it there? Is it to relieve pressure inside the stuffing tube, or is it a a provisional point for installing a grease nipple, allowing the flex cable to be greased? Curious to know people's thoughts and opinions.
-
-
Tfl(Horracing) has a strut with a rear nipple for greasing (not really a pinhole)...... must be your case.GillGO FAST AND TURN RIGHT !
www.grsboats.com.br -
a couple of mine have a little pin hole too. not sure what its for either.32" carbon rivercat single 4s 102mph, 27” mini Rivercat 92mph, kbb34 91mph, jessej micro cat(too fast) wasComment
-
It's for greasing but you need a pin tip on your greese gun to use it, like this one http://www.ebay.com/itm/like/360899847554?lpid=82Comment
-
Good stuff. Thx!32" carbon rivercat single 4s 102mph, 27” mini Rivercat 92mph, kbb34 91mph, jessej micro cat(too fast) wasComment
Comment