carbon fiber popeye hydro prop

[nitrous8e]

Carbon Fiber Popeye Hydro with the following !! 4074 2200kz - 4s-2p 220 swordfish any prop suggestions 2 or 3 blade i would like to stay with a " CNC" prop.

[T.S.Davis]

X447.

There will likely be a sweet spot that the boat likes but that's a good place to start.

[Jlov]

A lot of us Popeye owners have used the Y535 with pretty good success. Jeff
Here's the Popeye thread on the forum it has lots of info on the Popeye and set-ups people have used.
http://forums.offshoreelectrics.com/...-P-Sport-Hydro

[SloHD]

Lol, I believe Jeff meant y547... I plan on trying an s225, which is 46.7mm with 2.8 pitch. I'm building a cf Popeye as well. Haven't worked on it lately but I should be getting back to it soon.

[Jlov]

Thx Slo,was not paying attention. Watching Stanley Cup Finals and trying to browse posts at same time. Thx for the correction. I just got some of the Graupner K series props,a K-45 & K-48 going to give them a try as we'll.