electrics

[launchpad]

Need some help.
I have a 30"deep vee hull,with a 4074 Leopard and a 180amp esc (hobbyWing).I went through the matching of the tx and rx.The tx is a flysky FS-GT2B.With the matching rx.I have tried to get this thing armed but have had no luck.Once I programmed the esc I tried to start it.Nothing!The esc does not arm.I followed the instructions to a tee.I am at a loss on this.Mean while I have built and run 6 boats with no problem.Am I doing something wrong!

[tlandauer]

Is your throttle channel set to "reverse"? Channel 2 trim and E.P.A. been checked? You need to see if 100% will do, sometimes crank it up to 120% and see what happens. I have a GT3b, and that's how I program and arm the ESC, don't have GT2B though.