Pro Boat 1/12 Miss Elam

[jcgc]

I purchased a 1/12 Miss Elam off of ebay. The boat was originally nitro and I converted it to electric. When I received the boat it did not have a prop. I bought a X645 for the boat, but the prop shaft is way to big for the 3mm shaft on the boat. Does anyone have any advice on what size prop will fit the 3mm shaft.

[Luck as a Constant]

its a 1/8 shaft. you could buy a sleeve to convert the 3/16 bore of the prop, to the 1/8 pro boat shaft. a 645 is a bit big for that boat. an x440/3 and grab a sleeve and you'll be good

[jcgc]

Thanks for the info Luck!!!! any idea where I can get a sleeve?

[Luck as a Constant]

I'm pretty sure Ose sells them now


Sent from my iPhone using Tapatalk

[Luck as a Constant]

here http://www.offshoreelectrics.com/pro...?prod=ose-1035

[Luck as a Constant]

also the link for doing it yourself… http://www.offshoreelectrics.com/inf...propellers.php

[jcgc]

Your a life saver.....Thank you!!!!!!

[Fella1340]

You may want to think about upgrading it to a 3/16" flex shaft at some point, especially if you plan on running hard.

[Alexgar]

the proboat fastech prop is 3/16 with a 3mm to 3/16 brass adapter inside

[Alexgar]

pic

like so it comes with the prop