cc baracuda 80.

[flip3d]

i have one of these. it says 4s but not recamended.
if it is on the programing page y wont it work.
has any one used there barcuda 80 on 4s and it do ok.
should i pull the red wire and run a recever pack.
or just not run 4s.

lmk

flip

[Mich. Maniac]

Run a rx battery or external bec. 4S is perfectly fine on those esc's. Tis kinda confusing on the hydra's as well. Says 6S but in instructions it says not to set cut off @12V or it will void warranty. WAAA?