Tweet
Can someone please help were I can purchase new bushingsIMG_1461.jpg for my rudder post
-
-
Who is the hull manufactured by? What are the dimensions of the bushings?
Nortavlag Bulc -
Need to know the o.d. of the rudder pivot pin. These work for the FE30 but yours may be different. You can easily drill out your rudder stem 3/16" for these and get a 1/8" shaft and make a new post if all else fails
http://www.offshoreelectrics.com/pro...od=oct-oc4ltsb2008 NAMBA P-Mono & P-Offshore Nat'l 2-Lap Record Holder; '15 P-Cat, P-Ltd Cat 2-Lap
2009/2010 NAMBA P-Sport Hydro Nat'l 2-Lap Record Holder, '13 SCSTA P-Ltd Cat High Points
'11 NAMBA [P-Ltd] : Mono, Offshore, OPC, Sport Hydro; '06 LSO, '12,'13,'14 P Ltd Cat /MonoComment
-
Looks like a PB Bud,
But not sure if it is stock hardware.Comment
-
It is a pro Boat 1/8 miss bud 3/16 inner and 1/4 I will drive the faulty on out and checkComment
-
2008 NAMBA P-Mono & P-Offshore Nat'l 2-Lap Record Holder; '15 P-Cat, P-Ltd Cat 2-Lap
2009/2010 NAMBA P-Sport Hydro Nat'l 2-Lap Record Holder, '13 SCSTA P-Ltd Cat High Points
'11 NAMBA [P-Ltd] : Mono, Offshore, OPC, Sport Hydro; '06 LSO, '12,'13,'14 P Ltd Cat /MonoComment
-
I"d like to find a rudder that I can throw bearings in, just like all the other bushings I replace with bearings :-) ....Comment
-
IMG_1462.jpg hi this is the bushing knocked out 3/16 internal .318 inch external if anyone has any ideas ?Comment
-
Those are Proboat specific. 3/16 I.D. X 5/16" OD. Those are the same as they use in their struts and rudder brackets.
Buy the rudder bracket and knock them out.
Comment
-
Done thanks for your helpComment
-
Hi all I found another place that has all Bushings
Comment
? ONLY IF THEY WORK 
Comment