Power Options for some new Hulls I just pick up ? please help guys : )

[koontek]

So I recently just acquire some new Hulls from the local swap shop! I do have a couple of motors laying around and was wonder everybody's options on what the best option would be ? Also I'm not oppose to buying new motors if my motors are just not gonna do it. I would be running 4s-6s.

First off here are the motors I have laying around.



From Left to right:
1415-1Y 2400KV
1512/1.5Y 1800KV
1518/1Y 1800KV
1520/1Y 1600KV
1717/1Y 1580KV

So the first Hull I have is a Venom KOS P1 hull with upgraded hardware and a prop that has no markings so not sure what it is. maybe somebody could chime in?







Second Hull I have is a Miss Geico 29 with a offset rudder and stock prop I believe.






let me know what you guys think the best esc/motor/prop combo would be.

[TheShaughnessy]

1512 in the geico with a m445, 1518 in the mono with a x447/3. 442 for 6s s though i wouldn't recommend 6s

[lenny]

That x447/3 is a lot of prop for the P1 KOS mono,
Because it well torque roll and barrel roll very easily to the right with that narrow hull.
On my modded P1 KOS I use a x440/3 and it run nice and smooth on 3s, 4s, 5s,
With the stock v500 outrunner and the stock seaking 60a esc.

[TheShaughnessy]

a 440/3 could work better, it is pretty narrow

[koontek]

Thanks for the advice guys! Im gonna order up some esc's for them and give that a try!

[kfxguy]

Look. I think your just trying to make everyone jealous with that fine lot of motors you have there! Lol.

In the GEICO I'd run that 1512 motor on 5 or 6s. The 1518 I would sell to me for a good price lol. I have the perfect prop for your GEICO if your interested pm me. :-) we can work something out. Its an octura 2 blade that I spent over two hours getting it right. I sold my GEICO hull so its not needed anymore. It beat every prop I tried by far.

[koontek]

Look. I think your just trying to make everyone jealous with that fine lot of motors you have there! Lol.

In the GEICO I'd run that 1512 motor on 5 or 6s. The 1518 I would sell to me for a good price lol. I have the perfect prop for your GEICO if your interested pm me. :-) we can work something out. Its an octura 2 blade that I spent over two hours getting it right. I sold my GEICO hull so its not needed anymore. It beat every prop I tried by far.

Haha I been saving these motors for a rainy day! I have 2 of each in hopes of building a twin setup one day. PM you about the Miss Geico Prop btw!

[kfxguy]

Get rid of the 1415......to small for a boat. I have a buggy I can put it in.