width of a 1527???

[weil0127]

I can't find how wide a nue 1527 is anywhere. Does anyone know it off hand?

[flraptor07]

Do you want diameter or length? It's 40mm x 100mm

[Rocstar]

Do you mean diameter? 1.53'' x 4''

[weil0127]

Everyone has it at 4 inches long, but no diameter. So diameter would be great.

[Fluid]

Posts 2 and 3 gave you the answer.



.

[Rocstar]

1.53''

[weil0127]

Thanks everyone

[NativePaul]

Post 2 is incorrect though, Neu 15 series are 1.53" or 39mm in diameter not 40mm, they have thinner cans than the Chinese knock off motors, even the ones with a Neu licence. Maybe not an important difference in many situations, but if you use a leopard or other non-Neu cooling jacket I would silicone the ends and not rely on the Orings.

[Brushless55]

I can't find how wide a nue 1527 is anywhere. Does anyone know it off hand?

A 1527 you say?
well Joe just look in my PMono

[HRC]

Actually guys the 1527 can OD is 1.578” unless there has been another change I am not aware of. A bit larger than the 1515.

[NativePaul]

I expect you are correct, I was going off of my smaller Neu motors assuming they were the same for all lengths.

Please accept my apologies for doubting you flraptor07, 1.578" is as near as damn it 40mm.

[Chilli]

Yep, 1515 and smaller 39mm. 1521 and larger are 40mm.