What do you think?

[alex305v]

What do you think about this set?

I need your opinion on getting the right motor, esc, and battery. I found the motor and esc that seem like will do perfect and fit my budget. Let me know your opinion and recommend the battery.
__________________________________________________ __________________________
Leopard 4082 Motor (http://www.offshoreelectrics.com/pro...?prod=leo-4082)
2200 Kv/rpm per volt. Custom wound for OffshoreElectrics

Specs:
Magnets: neodymium
Watts: 2000 with Over 3500 Burst.
Poles: 4
Motor Shaft: 5mm with flat spot
Can Measures: 40mm diameter x 82mm long
Weight: 445 Grams
Mounting screw diameter required: 3mm
Bearing size: 5mm wide x 16mm od x 5mm id
Mounting Holes 25mm apart for use with most 540 mounts.
Includes Leopard 6.0mm male bullet plugs soldered to the motor and a matching set for your esc connection.

__________________________________________________ __________
Turnigy Marine 180A Brushless Boat ESC
http://www.hobbyking.com/hobbyking/s...arehouse_.html
Programmable settings;
Reverse
Low Voltage (none/2.8v/3v/3.2v/3.4v)
Brake: (none/soft/hard)
Timing (0.00/3.75/7.50/11.25/15.00/18.75/22.50/26.25)

Constant Current: 180A
Burst Current: 360A
Resistance: .0007ohm
Battery: 2-6S Lipoly
BEC: 5.8v/ 3A
Motor Type: Sensorless Brushless
Size: 72 x 68 x 34mm
Weight: 165g

[Shovelnoserc]

OSE sometimes stocks and ESC and Motor Combo. With upgraded bullets already installed. What's hull are you thinking of running this in?

[alex305v]

36 Cat

[Shovelnoserc]

It should work. Most people would suggest the same size motor. But lower Kv (1200to1600)and 6s batteries. It's a little more efficient In a cat that size.