carbon reinforcing?

[nemz305]

When i put the tape to hold the fibers of the carbon sheet do i just lay it down with the tape or do i remove it before putting epoxy on?

[kfxguy]

I just leave it but it always has a very thin strip of tape. Are you doing a carbon inlay? I have a thread posted about it. May help you.

[tlandauer]

Sorry to jump in here: does the adheresive on the tape have any negative effects on the curing of the epoxy?

[nemz305]

thanks can u send me the link kfxguy

[kfxguy]

Sorry to jump in here: does the adheresive on the tape have any negative effects on the curing of the epoxy?

Not that I've seen.

[tlandauer]

Not that I've seen.

Thanks!

[martin]

As said use a thin strip of tape & put the carbon in the hull with the tape side facing down, also ive never had any adverse effects on the epoxy curing from the tape adhesive.

[Rocstar]

This is the most detailed "How to" for CF inlays.

http://www.kbbforums.com/carbon-fiber-inlay-tutorial-t1041.html

[kfxguy]

Very very good writeup!

This is the most detailed "How to" for CF inlays.
http://www.kbbforums.com/carbon-fibe...ial-t1041.html