Tweet
I need a motor mount for a single 1717 finned castle motor in my cheetah. I havent had any luck finding something that will support it in the rear. I could machine a custom one but it takes too long on a manual machine and would be more cost effective to buy one. Help! :)
-
32" carbon rivercat single 4s 102mph, 27” mini Rivercat 92mph, kbb34 91mph, jessej micro cat(too fast) was -
Interesting. I've been doing some advance planning fro my Hydro build and have been looking for a similar mount......without success. The last few days I've been emailing with Dave at Hampton RC about making one for me for a TP4050 motor.
I'll be interested what pops up here, but you might want to ping Dave.
-
Comment
-
Nice work on the mount Randy. If you could incorporate water cooling up front to keep the front bearing cool, that would be the cat's meow......
Comment
-
I could make the front plate out if thicker angle stock to water cool not a hard thing to do. It would not be the $19.00 original price though that would add about $20. to the front plate.Comment
-
Randy's is less expensive, but here is one.
"There's nothing else I really want to do other than get up and build boats." - Mike FioreComment
-
32" carbon rivercat single 4s 102mph, 27” mini Rivercat 92mph, kbb34 91mph, jessej micro cat(too fast) wasComment
-
southriver RC Jim Williams will make anything you need and prob already has one made for that motor.We call ourselves the "Q"Comment
-
Last edited by kfxguy; 12-04-2013, 07:30 PM.32" carbon rivercat single 4s 102mph, 27” mini Rivercat 92mph, kbb34 91mph, jessej micro cat(too fast) wasComment
Comment