caps

[Southwest]

When using caps, is it feasible to twist the - wires and + wires together as long as the twisted wires reach the power wires of same signs. This way you would have less total wires to make things less ugly and cumbersome. I know in brushed motors, we did this for noise interference. I want to add caps on the power lines. Thanks for your time and patience. This just popped up and thought I would ask. This way I can overlap the power line caps onto esc caps and would look a lot better.

[carlcisneros]

they should be installed on the power leads as close to the esc as possible.

no need to twist any wiring.

[Southwest]

Mod , delete posting, thanks!