Who can I send my props to to be sharpened and balanced?

[shartinspartin]

I am new to fe boats but not new to the hobby. I bought a prather steel prop thinking I could take it to a hobby shop to get it sharpened and balanced. Boy was I wrong. I dont want to do sharpen and balance it myself. Does anybody know where or who I can send this to to get sharpened and balanced?

Thanks

[iridebikes247]

Dasboata...aka chris

http://www.dasboata.com/

I have had quite a few props sharpened and cut down, de tongued, etc. his work is awesome you'll be blown away.

[shartinspartin]

thanks

[dasboata]

Thanks Mike !!!!! e mail me at [email protected] what size prop ?

[meangenesracing]

I agree dasboata just did two 3 blade props for me chris does great work

[Doug Smock]

Thanks Mike !!!!! e mail me at [email protected] what size prop ?

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

[shartinspartin]

I have a prather 215. But bought that for the stock setup.
I now have a t180 and 4082 turnigy motor.

What do you guys think is a good prop for a turnigy 180 and turnigy 4082 1500 kv pushing a spartin?

I would like to get the prather 215 and maybe 220

[dasboata]

I have a prather 215. But bought that for the stock setup.
I now have a t180 and 4082 turnigy motor.

What do you guys think is a good prop for a turnigy 180 and turnigy 4082 1500 kv pushing a spartin?

I would like to get the prather 215 and maybe 220

I stock Prather props but try Here 1st. you can send me the props and I will go over them if you are interested

[shartinspartin]

And whats the tag on 1-2 props?

[dasboata]

Cost you $25 for the bronze and $28 for the SS each I supply the Prather props

[shartinspartin]

Does that include sharpening and balancing?

[dasboata]

Yes ! Plus $3 or $6.50 shipping USA

[Brushless55]

I might need to get a 1455 from you Chris

[dasboata]

I am would have to order 1 unless you want me to cut down a 1457 but anyway LMK thanks chris

[BamaHydro]

Looks like I have me a source to get that Grimracer prop worked on, it just bubbled the water when I put it on my UL-1.


BamaHydro