Tweet
I have quite a few brushed motors and bl motors. I need a rpm/kv meter. I have a hK meter with 3 alligator but no instructions. Any info on this matter will be appreciated, thanks!
-
-
They are on the HK site as long as you sign in I believe -
I tried it again with 2- 7.4 lipos on a brushed motor and got 8817 kv but no rpm #'s came up. I attached the yellow alligator clip to brushed lead and red and black to pos/neg lipo leads and came up with what I typed here today. I found the answer on nitro site thru google but was very vauge; all sites said the same. BTW, thanks for replying. I put a brushed motor in a airboat but made airboat to uncontrollable. I ended by using a 1400kv outrunner on 3S. Now all my brushed motors are 12/2 or 14/2 winds. Thanks again and reading the reason for rpm/kv meter.Comment
-
What size props are you using on the air boat SW are two or three blade , do you ave any pic's of your boat .Comment
-
I'll get back with you on pic's but a storm door mentioned by the cook comes first since I don't cook, LOL!Comment
Comment