Boat Slows Down As If It Reached Cell Cutoff Threshold ?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Cinnabun
    Senior Member
    • Jun 2013
    • 433

    #16
    My seaking does almost the same thing but I get more than 8 seconds of burst. I reset the esc and disabled lvc and it fixed that but now after a minute the esc bugs out and starts controlling it's own throttle.

    Comment

    • oscarel
      Fast Electric Addict!
      • Dec 2009
      • 2127

      #17
      If you're using the program card, 1=1(forward only) 2=1(auto calculate) or 4(4s) 3=1(no protection) 4=whatever you need to set at depending on Y or D.

      Comment

      • Alexgar
        Fast Electric Addict!
        • Aug 2009
        • 3534

        #18
        Is set it to no protection just to check it you can aLways buy a Lipo sheild

        Comment

        • lenny
          Fast Electric Addict!
          • Sep 2010
          • 4294

          #19
          That sounds like you need to recalibrate the throttle range,
          You should do that first and than program the esc.


          Originally posted by Cinnabun
          My seaking does almost the same thing but I get more than 8 seconds of burst. I reset the esc and disabled lvc and it fixed that but now after a minute the esc bugs out and starts controlling it's own throttle.
          ? ONLY IF THEY WORK

          My youtube videos.http://www.youtube.com/user/61manx?feature=mhee

          Comment

          • kendt
            Senior Member
            • Jul 2011
            • 557

            #20
            I have two and both are problematic. I have the lvc turned off and run a separate bec and still have trouble with this.

            Comment

            • Snowride
              Senior Member
              • Sep 2010
              • 297

              #21
              I swapped almost everything out. Motor, ESC, receiver, even the darn radio only to find out I have some weak batteries. Nothing else was wrong. Boat screams now but need to do something about the flex cable as I already busted one.

              Comment

              Working...