Tweet
I'm kind of leaning towards the UL-1 for a bunch of reasons a few are:
I have 5 pairs of 2s Lipos
The Hardware is compatible with everything I have, 3/16" struts .150 Flexshafts, bunch of props
Great electronics. (I've pushed a Leo 4074 2200kv for more than a year on a Ms. Geico with the AQ 60 Speed Controller x445 prop no issues)
I've ran my other 2030kv motor on my revolt on 5s a million times no issues there.
I dont know much about the Ms. Excite I assume it's rigged with 4mm strut hardware, the ESC is similar/same as the SK60's and I dont own 3s lipo's.
I do have another 2030kv and an AQ 60amp Speed controller spares that I could install on the Excite. Or Leo and Neu 2200 kv motors.
Any benefits to the Atomik Hull over the UL-1.
Any input is appreciated, My LHS is getting both of these in next week. I have choosing rights, lol
I have 5 pairs of 2s Lipos
The Hardware is compatible with everything I have, 3/16" struts .150 Flexshafts, bunch of props
Great electronics. (I've pushed a Leo 4074 2200kv for more than a year on a Ms. Geico with the AQ 60 Speed Controller x445 prop no issues)
I've ran my other 2030kv motor on my revolt on 5s a million times no issues there.
I dont know much about the Ms. Excite I assume it's rigged with 4mm strut hardware, the ESC is similar/same as the SK60's and I dont own 3s lipo's.
I do have another 2030kv and an AQ 60amp Speed controller spares that I could install on the Excite. Or Leo and Neu 2200 kv motors.
Any benefits to the Atomik Hull over the UL-1.
Any input is appreciated, My LHS is getting both of these in next week. I have choosing rights, lol
Comment