hull size for 6s 5100 packs

[sampit]

Still after a bit of advise
having a hard time using these packs up in any build either as a single 6s pack build or a pair
Looking for a 6s cat or hydro hull that would comfortably run one or two of Dinogy 6s 51000 packs in, sure are heavy lumps together with a motor and esc
a bit to much weight for my H&M 36" Drifter that I am building with 2x3s 5000 packs
is there a good cat hull that would run a single 5100 6s pack across the tunnel floor without to many handing problems

[Savage Skidoo]

Still after a bit of advise
having a hard time using these packs up in any build either as a single 6s pack build or a pair
Looking for a 6s cat or hydro hull that would comfortably run one or two of Dinogy 6s 51000 packs in, sure are heavy lumps together with a motor and esc
a bit to much weight for my H&M 36" Drifter that I am building with 2x3s 5000 packs
is there a good cat hull that would run a single 5100 6s pack across the tunnel floor without to many handing problems

Sampit i think you'll find most hull's have a hard time running those big packs in tight boats , that alot of weight

[sampit]

Just need a bigger boat me thinks ,there was easy enough room in my Cheetah but to much weight effected the performance 45"/50" plus im thinking

[T.S.Davis]

Are wanting to race it or just have fun with it?

[sampit]

Thanks
I would say a race set up boat is tempting me this time
42" sprint cat maybe 6s2p?
but,would like a hull, that is stable and can run a single 6s pack

[T.S.Davis]

Tough to get all the parts in the right spot on a single pack cat. Our guys have been running the 36" Sprintcat on 6s2p. Flawless.

[sampit]

I think that will be a hard hull to beat, are most running 1521 singles? do any run twin 6s set ups? I have seen a few nice 5s twins set ups

[T.S.Davis]

6s2p on a Neu 1527/1y. It's the sweet spot for the hull and the motor. Like a marriage made by the boat gods.

[madmikepags]

yes SC .40 on 6s w/ a 1527/1Y is definitely a great setup!!!