43" brushless jae rigger

[pond skipper]

boat1.jpgboat2.jpgboat3.jpgboat4.jpg
well it may only end up running about 35-40 mph but it will look good doing it! thanks to work i haven't been able to get much done on it in the last week or so but im back on it!

[pond skipper]

BOAT5.jpgBOAT6.jpgmultirotor.jpg

[pond skipper]

Woops, the last photo is of a multirotor im building.

[pond skipper]

Dad got a little carried away with the polishing compound and hardware lol.

[longballlumber]

Do I sense a little OCD? LOL

Have fun,
Mike

[pond skipper]

Lol you would be correct... Me and him both... Probably why it's taken so long to get the thing done honestly...

[Cooper]

Dad got a little carried away with the polishing compound and hardware lol.

Lol, looks like he is the Crome shops competition!!

[pond skipper]

Lol no doubt, he was using meguiars mag wheel polish and an electric end grinder with a 4" cotton wheel on the aluminum parts.

[pond skipper]

Looks like its going to be on the water this weekend!

[urbs00007]

whats your rtr weight and what camera are you going to use to video tape with?

[pond skipper]

Not sure, it feels like its between 9-10 pounds I suppose, and ill likely be using my iPhone to record with for now.

[pond skipper]

For the record, this is the first and will be the LAST ABC prop I work on, I'm not even doing anything special to it just balancing, thinning, sharpening, and polishing for now, the material seems much harder which I can live with but there's soo many imperfections in the casting it's rediculous!!

[pond skipper]

Didn't make it this past weekend, busy finishing up some stuff before the new baby gets here but should be this week or this weekend for sure.

[pond skipper]

whats your rtr weight and what camera are you going to use to video tape with?

I actually got to weigh it all yesterday, it's 14.8 lbs with everything in it ready to go.

[pond skipper]

Well got the 10s jae out finally, it ran 77.8 and is pulling super hard to the right, so much so that it is causing the boat to run completely crooked when I try to run it straight and it's the turn fun causing it, it's pulling the right sponson down into the water HARD so ill have to kick it forward and try it again. Still ran 77.8 for its first time out! Way more left in it!!!