Need help....

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • sjslhill
    Fast Electric Addict!
    • Apr 2007
    • 1513

    #1

    Need help....

    I just purchased a Prather Spitfire II hull, always wanted one. The hull runs a 7.5cc nitro normally. I need suggestions for conversion to electric.

    Thanks
    Steve.
  • raptor347
    Fast Electric Addict!
    • Jul 2007
    • 1089

    #2
    Steve,
    I'd go 6-8S, a modified K&B lower with a fairly good size outrunner (1100-1200kV on 6S, 850-900kV on 8S). Modified Octura 1750/3 to start with, it needs a lot of lift to carry the weight on the tail. Done properly, it could be a pretty competitive Q hydro.
    Brian "Snowman" Buaas
    Team Castle Creations
    NAMBA FE Chairman

    Comment

    • T.S.Davis
      Fast Electric Addict!
      • Oct 2009
      • 6221

      #3
      Put a monster torque servo on there too. Especially with an out runner.
      Noisy person

      Comment

      • sjslhill
        Fast Electric Addict!
        • Apr 2007
        • 1513

        #4
        Cool

        Cool, thanks!

        Originally posted by raptor347
        Steve,
        I'd go 6-8S, a modified K&B lower with a fairly good size outrunner (1100-1200kV on 6S, 850-900kV on 8S). Modified Octura 1750/3 to start with, it needs a lot of lift to carry the weight on the tail. Done properly, it could be a pretty competitive Q hydro.

        Comment

        Working...