Help with mean machine setup please

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • tunnelvission
    Member
    • Aug 2012
    • 55

    #1

    Help with mean machine setup please

    I have a mean machine I'm wanting to get running. I have $350 to work with. I have hull and hardware already, so I would like to ask everyone's opinion on motor/ESC/prop for a budget build?
    No real speed goals in mind. Would just like to have a good solid budget cat when it's all done with

    Thanks ahead of time for your help
    Daniel
  • Fluid
    Fast and Furious
    • Apr 2007
    • 8012

    #2
    A lot depends on your speed and run time goals. My MM runs well on a ProBoat 1800 Kv motor, AQ 60 amp controller and a 4S/5000 pack. An m445 is a good prop to start. Once trimmed out well it runs good with speeds around 40. More prop would up that a little.

    A faster setup would be a Leopard 4074/2000 motor. As for an ESC - some folks like the Swordfish 120 but I'd go for the SeaKing (Turnigy)180. On 4S with an m445 prop, speeds should be in the mid-upper 40s. Again, more prop means more speed up to a point.




    .
    Last edited by Fluid; 06-05-2013, 02:12 PM.
    ERROR 403 - This is not the page you are looking for

    Comment

    Working...