Trying to identify roughly made hull

**BigMarkD** · 04-26-2013, 07:31 PM

This little hydro is 26 inches long, 14 inches wide at the top of the sponsons, 6 3/4 inches wide between sponsons, appears to be epoxy glass, the air traps go from the sponsons and taper all the way to the transom, the outside of the tail angles out from the air dam straight to the deck. This one is roughly made but I would like to find the original maker. With no information on the hull, I posted it on Ebay but this is one last attempt at identification. The ebay listing is number 151035019462 Thanks, Mark

DSC01554.JPG DSC01560.JPG DSC01561.JPG DSC01564.JPG