Lipo charging question

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • frdvschvy
    Member
    • May 2008
    • 60

    #1

    Lipo charging question

    New to lipos and have a question. My chargers instructions are not very detailed and I want to make sure I do not fry my new batteries.

    My charger is capable of charging two 2s packs at the same time and has four different current settings (0.5a, 1.0A, 1.5A, 2.0A). The batteries are Elite 2S 4800mah packs. What current setting should I use to charge these batteries?

    Thanks for your help!
  • ghostofpf1
    Senior Member
    • Jun 2008
    • 392

    #2
    You could charge those packs at 4.8 amps (1C) so you could use your chargers full 2 amp charge rate and be well within limits.It will take quite a while though depending on how depleted the pack is before starting charging.

    Good Luck
    Ghost

    Comment

    Working...