what is the best rudder for hk genesis 1045mm

[novice]

hi i was wondering what is the best size rudder and strut for hk genesis 1045mm it is the fibre glass model , i am running 2 leo 1600kv motors and 2 turnigy marine 180 esc's with 2 zippy flight max 40c 6s lipo 5000mah.
servo is a spektrum s6040 20kg surface digital high speed. it will be a center mounted rudder

and also i am looking for 2 stingers for it it is a 3/16" drive line on both motors 4mm flexi shaft

any help will be appreciated

novice

[jeffrey1]

miss geico 29bl. is a good rudder with ample opening for water. i dremeled the stock rudder on my 3week old genesis and works better so you can also do that. also i opened up the outlet on side of boat too. runs alot cooler now ,.jeff

[LakeTahoeQuattro]

Where did you get a genesis with twin motor model? TFL or did you build from bare hull? I am deciding single or twin genesis 1045. Also I have found genesis 935 hulls too, these are different i am guessing. Thanks in advance

[novice]

Where did you get a genesis with twin motor model? TFL or did you build from bare hull? I am deciding single or twin genesis 1045. Also I have found genesis 935 hulls too, these are different i am guessing. Thanks in advance

hi LTQ

i got it off the UK site for hobbyking , the only problem with this hull is the tight fit on everything so you cannot go to big with batteries and motors but nice hull , project nearly complete i am just waiting on parts i ordered from fightercat.com been 4 weeks now waiting. just wanna get it in the water now.

take care
novice