Cooling line question

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • G-UNIT
    Senior Member
    • Nov 2009
    • 949

    #1

    Cooling line question

    My cooling line enters the esc first then into the motor.
    My question is, does the line enter the lowest part of the water jacket and fill it up and then out or does it enter the highest part of the jacket and run down then out, which is best.
  • Make-a-Wake
    FE Rules!
    • Nov 2009
    • 5557

    #2
    Lowest in, highest out.
    NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: http://forums.offshoreelectrics.com/...est!&highlight=

    Comment

    • Chilli
      Fast Electric Addict!
      • Jan 2008
      • 3070

      #3
      This way the air bubble gets pushed out so the jacket can fill with water.
      Mike Chirillo
      www.capitolrcmodelboats.com

      Comment

      • martin
        Fast Electric Addict!
        • Aug 2010
        • 2887

        #4
        Yep highest out as said, if you do it the opposite way round ie lowest out highest in the jacket dosnt fill to the top of the jacket as it starts coming out when the water level reaches the level of the lowest outlet.

        Comment

        • BHChieftain
          Fast Electric Addict
          • Nov 2009
          • 1969

          #5
          Great question, I never thought about it, and lucky for me, all of my boats are set up right...
          Chief

          Comment

          • G-UNIT
            Senior Member
            • Nov 2009
            • 949

            #6
            Thanks all for your responce.
            I have one boat one way and another boat the other way, I'll swap the wrong one around tonight.

            Comment

            Working...