Here a datalogging of a supermotor?!Untitled_2013_2_27_1.jpg
Let me know what do you think of this
Collapse
X
-
Tags: None
-
am I seeing 34,000 rpm ?
if so you need to sell motor & ESC to me....
Harry60" Expresscraft SuperCat
(2) 2028 Castle motors 64.7 mph
10s3p with x450/3 props 15,000 mah 40c cells, -
-
Comment
-
Viper the pole count is correct......4 as it is a Neu 1527.....I 'm not sure it is a bad connection but for sure a big errorTthe motor is running in the 50k (50713rpm) on the rigger with no issues,temp is good,current around 260A so it was a bad reading on the bench!Thanks GillGO FAST AND TURN RIGHT !
www.grsboats.com.brComment
-
Right Viper...I would love to have a motor spinning those rpm's....a 300mph's boat!!!!GO FAST AND TURN RIGHT !
www.grsboats.com.brComment
-
Gil,
Where the data coming from? The esc or third party hardware?
EDIT: I didn't see you other post.
Sounds like you need to divide by pole count.
TGTyler Garrard
NAMBA 639/IMPBA 20525
T-Hydro @ 142.94mph former WRComment
-
Hi Tyler
The data is from the SF 300APlus.I was just testing a motor and decided to check for the data.....certainly a misreading caused by something that I can't identify. GillGO FAST AND TURN RIGHT !
www.grsboats.com.brComment
-
everything went of the scale at that point, 300mph with 34 KW is not good either. Well, don't they say 'Go out with a bang' ?
Interesting though that all went up, except for the temp.
Data is logged by the ESC right? If it was wireless you could blame some interference.Wisdom is knowing how little we knowComment
Comment