help to convert a boat from gas to electric

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • adifrum
    Member
    • Feb 2013
    • 43

    #1

    help to convert a boat from gas to electric

    Hi,
    I'm new on the boat and I whant to convert from gas to electric
    I have the kit from castle car 1/5 (motor 2028 and esc mamba xl) and I whant to know if I can raid on the bot the speed control if I keep the fan + attached water coller or I must use the one special for boat.(hidra ice 240)
    I whant to know the tur of water from the rudder to exit.

    Thank you,
    Adrian
  • Fluid
    Fast and Furious
    • Apr 2007
    • 8011

    #2
    I whant to know if I can raid on the bot...
    Man, I cannot understand your post. Do you want to know if you can use the Mamba ESC in the boat? I would not suggest that, it will probably fail since a boat's amp draw is substantially greater than a car's. The Hydra ICE240 is not adequate if you want to run 8S or 10S, you would need the Hydra ICE200HV.

    I whant to know the tur of water from the rudder to exit.
    Does this mean you want to know the routing of the waterlines?

    Rudder -> ESC -> Motor -> Exit




    .
    ERROR 403 - This is not the page you are looking for

    Comment

    • adifrum
      Member
      • Feb 2013
      • 43

      #3
      thank you !
      I thinking to Hydra ice 240 becouse no need extra bateries for receiver

      Comment

      Working...