Tweet
Is there a minimum distance that the prop should be off the back of the boat? My set up is a seaducer hull with the speed master 21 mono hardware , the worry is when I mount the hardware to the hull, the back of the strut touches the hull and puts the prop at about 3 in off the hull.... Is this to close?
-
Slow and steady isn't my pace -
MODEL BOAT RACER
IMPBA President
District 13 Director 2011- present
IMPBA National Records Director 2009-2019
IMPBA 19887L CD
NAMBA 1169 -
Sweet that helps a lot, thanks!!Slow and steady isn't my paceComment
-
You're welcome sir.
MODEL BOAT RACER
IMPBA President
District 13 Director 2011- present
IMPBA National Records Director 2009-2019
IMPBA 19887L CD
NAMBA 1169Comment
-
I've read time and time again, you've got to be spot on with the recommended set up on the Seaducer or you'll have a heck of a time getting her to run right. A well set up Seaducer is a thing of beauty to watch.Mike Chirillo
www.capitolrcmodelboats.com
Comment
-
Ha, I hope I'm not getting in over my head lol.... I've heard the the speed master strut has had great success on this boat, so I hope it works. I've got the seaducer rudder, it's really a nice peace.Slow and steady isn't my paceComment
-
You should be in good shape then. It might take you a little while to get her right but it will be worth it in the end. Keep us updated.Mike Chirillo
www.capitolrcmodelboats.com
Comment
-
Will do, thanks again for the help guysSlow and steady isn't my paceComment
Comment