HELP with a 26 bling rocket (df 26)

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • dannybj26
    Going fast on the 836
    • Sep 2011
    • 306

    #1

    HELP with a 26 bling rocket (df 26)

    I am building a 26 FC Bling Rocket Im hoping for 50+ mph when I finish it

    Motor: 550 heli 1600kv outrunner
    Esc : FC 240 amp 2-8s+castle bec
    servo (steering) : traxxas 2075
    servo (strut adjustment):traxxas 2080
    batteries: 2 gforce 25c 4000mah 3s total 6s
    Prop: x437/3
    Radio:futaba 4pl 2.4
    I need advice for positioning of all the electronics so that the COG will be correct .
    I know that I sound like a newb but Im new to building the FE boats Instead of buying them.
    Here is what I have so far
    26 BLING LAYOUT OSE.jpg
    losi scte full carbon,Hpi baja 5te,Hb tcxx
    Enforcer gator full mod 30cc
    Rico 31
  • Basstronics
    Fast Electric Addict!
    • Jun 2008
    • 2345

    #2
    Sounds like 10 Lbs of crap in a 6 Lb bag.

    Looks like you are over complicating it. I cant see why you would need adjustable trim on the fly. Its just more bulk weight in an already cramped boat.

    Two 3S batts? Will they even fit in your proposed location?

    240A esc? Ya I was looking to buy one of those for my 42" boat...

    IMO you are going to big on the ESC, drop the extra servo. Motor/battery combo might work but I think your going to have a hell of a torque roll... Most people with these are having a good time with 3674 and running 4S.
    42" Osprey, 32" Pursuit, 26" Bling Rocket (rescue), Blizzard Rigger, JAE 21FE rigger, Hobby King rigger (RIP)

    Comment

    • Rocstar
      Joel Mertz
      • Jun 2012
      • 1509

      #3
      That's a lot for that boat. This one runs about 50 mph with a 2200kv on 4s.
      Keep your motor as far aft as possible and you will have all the adjustment you need with your batteries. Start your CG around 7-8'' from the transom.
      Fun boat btw..

      DE699687-7D39-4B2B-9D7E-7487A3E2FC22-665-0000012E870F53CB.jpg
      Last edited by Rocstar; 01-23-2013, 09:01 PM. Reason: Way too big a pic...
      "There's nothing else I really want to do other than get up and build boats." - Mike Fiore

      Comment

      • dannybj26
        Going fast on the 836
        • Sep 2011
        • 306

        #4
        well with what I have so far do you think that I might be near SAW speeds ? I am not aiming for that but just curious

        -Danny
        losi scte full carbon,Hpi baja 5te,Hb tcxx
        Enforcer gator full mod 30cc
        Rico 31

        Comment

        • dannybj26
          Going fast on the 836
          • Sep 2011
          • 306

          #5
          What motor mount do I need for it because I cant find a good motormount w/o the rear ring for the longer motors

          -Danny
          losi scte full carbon,Hpi baja 5te,Hb tcxx
          Enforcer gator full mod 30cc
          Rico 31

          Comment

          • Rocstar
            Joel Mertz
            • Jun 2012
            • 1509

            #6
            http://www.offshoreelectrics.com/pro...prod=ose-80230
            "There's nothing else I really want to do other than get up and build boats." - Mike Fiore

            Comment

            • dannybj26
              Going fast on the 836
              • Sep 2011
              • 306

              #7
              Thanks Rocstar22 thathelped alot with ordering, now I need a good rudder for it

              -Danny
              losi scte full carbon,Hpi baja 5te,Hb tcxx
              Enforcer gator full mod 30cc
              Rico 31

              Comment

              • Rocstar
                Joel Mertz
                • Jun 2012
                • 1509

                #8
                http://www.offshoreelectrics.com/pro...prod=ose-80052
                "There's nothing else I really want to do other than get up and build boats." - Mike Fiore

                Comment

                • dannybj26
                  Going fast on the 836
                  • Sep 2011
                  • 306

                  #9
                  If you can can you post a pic os the transom so that I can see the layout

                  -Danny
                  losi scte full carbon,Hpi baja 5te,Hb tcxx
                  Enforcer gator full mod 30cc
                  Rico 31

                  Comment

                  • Rocstar
                    Joel Mertz
                    • Jun 2012
                    • 1509

                    #10
                    Here you go.

                    EC4236C6-884B-4DED-903C-B540CC2AB4E6-2134-000002938B440D51.jpg
                    "There's nothing else I really want to do other than get up and build boats." - Mike Fiore

                    Comment

                    • Heaving Earth
                      Banned
                      • Jun 2012
                      • 1877

                      #11
                      I got speedmaster mini rudder. Very good quality

                      Comment

                      • Heaving Earth
                        Banned
                        • Jun 2012
                        • 1877

                        #12
                        ImageUploadedByTapatalk1358992800.946595.jpg

                        Comment

                        Working...