Tweet
Im just curious what is normal weight for a p-spec rigger rtr.
-
Tommy Levescy sponsored by: RCJuice.com, Rawspeed, Scorpion Precision Performance, TC Racing, Triton RC, Oxidean Marine and Cencal Hobbies.
Current Namba 1mile record holder: Pltd sport hydro 1:19:72 P-sport hydro 1:14:31 -
anyone???Tommy Levescy sponsored by: RCJuice.com, Rawspeed, Scorpion Precision Performance, TC Racing, Triton RC, Oxidean Marine and Cencal Hobbies.
Current Namba 1mile record holder: Pltd sport hydro 1:19:72 P-sport hydro 1:14:31 -
Take this with a pinch of salt as we don't have the P-spec class over here and I mainly posted so I could subscribe to the thread and find out myself, but we do have Hydro2s which are 4s hydros with a 560g battery, which is around what a typical High C 4s1p 5000mah pack weighs, and they are around the 4lb mark, mine is a JAE.21 which started off heavier than average and has quite a few repairs now so weighs over 5lb, I would guess the lightest you could build one would be about 3lb but it would have to be smaller than average and would be for calm water only.Paul Upton-Taylor, Greased Weasel Racing.Comment
-
If I remember right the Limited JAE's I've built come in just under 4lbs.MODEL BOAT RACER
IMPBA President
District 13 Director 2011- present
IMPBA National Records Director 2009-2019
IMPBA 19887L CD
NAMBA 1169Comment
-
the reason im asking this is because i have a new rigger that rtr is weighs 3lbs 11.5 ounces so i was curious to see if im close to the right weight and it looks like im going to be on the lighter side but not too much. thanks. What prop do yall recomend? its got a ul-1 Motor and spedo.Tommy Levescy sponsored by: RCJuice.com, Rawspeed, Scorpion Precision Performance, TC Racing, Triton RC, Oxidean Marine and Cencal Hobbies.
Current Namba 1mile record holder: Pltd sport hydro 1:19:72 P-sport hydro 1:14:31Comment
-
ABC H-7. your weight is good. What speedo?Comment
-
My 30 inch rigger is 4LBS 4Oz. with out paintComment
Comment