rigger

[RaceMechaniX]

Very cool, sorry about the name but it's been 20 years since I saw the add in the RC Car action buyers guide or the boat buyers guide.

What can you fit motor wise without having too tight of a bend radius for the drivline?

TG

[urbs00007]

rigger

tyler, i think i can put motor and esc in front compartment ( motor to the left ) and battery behind bulkhead. If I cant how tight a radius can I run cable ? thanks

[RaceMechaniX]

For a 3/16" cable I would recommend no tighter than 6" radius. If the motor and esc were in the front compartment the bend radius is not a problem. If it were in the rear compartment, I would just check before cuttnig any holes.

TG

[grsboats]

4082 2000kv,esc Turnigy 180 and nanotech 45C 6S produced speeds in the mid to high 80's on my previous Jae Fe so you can expect good performance with your boat too.1450 (45mm cup 3,5) 85mph ABC 52X70 88mph. Gill

[urbs00007]

rigger

thanks guys. any problems with the swordfish 200 ? seems like a good fit with my boat.

[grsboats]

here is this same combo in a Jae Fe.my experience is with the SF 300 but for this motor the 180 is more than enough.

http://youtu.be/ym0vOQDDbIc

[urbs00007]

rigger

is the seaking 180 same as turnigy 180 that ose sells?

[grsboats]

yes.

[urbs00007]

rigger

gil, just ordered the 4082 3d 2000 kv. would you say it has more power than a picco 45 stock ?

[grsboats]

Yes ......It has 4,7hp and can be compared to a good nitro 45 engine running in the 40K depending the set up.Gill

[LOVE6S]

here is this same combo in a Jae Fe.my experience is with the SF 300 but for this motor the 180 is more than enough.

http://youtu.be/ym0vOQDDbIc

Is that rigger a JAE 21?

[grsboats]

it's the Jae Fe amost same boat as Jae 21.The main difference is the hull height on the Fe version.Gill

[martin]

Hi Gill, hows the new carbon boat. Have you run it yet. Martin.

[grsboats]

Hi Martin yes I did few tests with the Leo 4092 on 8S but figured out that a Neu motor would be the ticket to reach my goal. The Neu 1527 1D just arrived and I will need to make some adjustements to get the boat ready and as soon its done will post a video.Thanks Gill

[martin]

Gill are you going to be running the 1527 1D on 6s. Martin.