Pursuit 32.5 in hull

[MAMBA2200]

Just wanted to get some opinions on these hulls about quality and durability so basically are they any good??

[iamandrew]

its a good shape, the hatch design isnt that great
the quality of mine was $hithouse, pin holes everywhere in the joins in the sides
it does drive well.

Id look for somthing with a hatch that has a square cutout, so much easier to tape!

[stadiumyamaha]

I love mine. It's not the stock config but as far as the hull goes its great for rough water and is very tough.
Cc 1515 2200kv m545 seems to be my pursuits sweet spot. 4sImageUploadedByTapatalk1357344382.366524.jpg

[LOVE6S]

I love mine. It's not the stock config but as far as the hull goes its great for rough water and is very tough.
Cc 1515 2200kv m545 seems to be my pursuits sweet spot. 4s[ATTACH]91239[/ATTACH]

What do you get with that setup?

[TheShaughnessy]

Just missed out on one of these last night.m got out bid on e bay by a buck. Went for 81 bucks , hull and hardware. Had a bid in at 80 and couldn't sign in before the bid ended.

[Basstronics]

Ya that was an OK deal. Trouble is it had that crappy strut on it...

If you want one of these get the bare hull and a good speedmaster strut and do it right.

[TheShaughnessy]

So it's not a total loss lol. Didn't notice the strut. Was it a 2 piece. You saw it too? The half orange half yellow one?

[Heaving Earth]

Kintec racing sells them completely built and custom painted. Looks like they're out of stock but I'm sure jan could do one up. It's an option anyways

[MAMBA2200]

Im thinking about one of these but im also looking at the df35 what to do

Sent from my DROID RAZR using Tapatalk 2

[jkr]

Df Cyberstorm...

[srislash]

Df Cyberstorm...

[Basstronics]

Well the Pursuit is a knock off type of hull for the value minded hobbyist- providing you can get one in the US anymore. Hobbyking is gouging on shipping now- just the bare hull alone would be $38 to ship slow boat from china, $63 EMS...

You would be further ahead buying a new non knock off DF hull from OSE and get better quality too!

I bought the Kintec O-Ring fix and it was a joke. The O_Rings were so small I would need 12 of them to fill gap if even that will work... I bought the strut from Kintec too!

[stadiumyamaha]

Last time I put a GPS in it I was running low to mid fifties.

[Cooper]

I think the ones Steve sold here and jan from kintec are great boats! Yes the hatch will crack quickly if not reinforced. They turn on a dime. Only need one oring , stuff inside the strut and just cut some waterline. 442 cupped, dt, bc, 6s 74mph. ( not recommended unless you want bad electric smell reminding you not to do it). Several passes all good! 4s all day long. Hull holds up well. Great play boat, wave jumper, very good for newbie in my opinion.

[ron1950]

love mine,,,got it from kentec...friend just got a bare hull from hor racing and he said his was good also.....recommended highly....runs the chop very well