jae 21 6s

[sampit]

Does any know what the max size 6s liop that can fit in the jae?
thinking about building one to run a TP3674 1700kv motor, just not sure what the best fitting 6s pack would be.
would a 5100 6s DINOGY fit. or is a 4s setup a better option.

[martin]

Sam i know a Turnigy Nano 6s 45c - 90c does fit ok, their 49 x 50 x 157. I only have the size of a Dinogy 6s 5000mah which is 57 x 46 x 160, the dimensions of the JAE 21fe tub is (inside sizes) 63mm wide x 54mm high. The hatch width opening is 46mm. Hope this may help. Martin.

[martin]

By the way to get the Turnigy 6 cell in you need to cut away the lip that the hatch sits on, its tight but it just goes in. Looking at the size of the Dinogy i dont think youll get them in as their quite a bit bigger.

[sampit]

Thanks Martin, looks likes the jae idea is out the window

Do anyone know what other hull I could run a single 6s 5100 pack in cat, mono.or hydro