Fountain P1 50" / 130cm single motor, I need your setup advice

[Alfa Spirit]

Hi,

The hull is a deep vee 50'' x 13", how many volts and what kind of motor do you recommand?

Thanks

[Mel279]

Minimum 10s, can use either leo or TP 56/58 motor

[gerardobrandao]

Hi,

The hull is a deep vee 50'' x 13", how many volts and what kind of motor do you recommand?

Thanks


[ATTACH=CONFIG]89166[/ATTACH]

[QUOTE=Alfa Spirit;469178]Hi,

The hull is a deep vee 50'' x 13", how many volts and what kind of motor do you recommand?

Thanks

Hello Alfa :D


I would go with a TP5850 or a Proteus marine X524...
Leopard is an option to with the Leopard 5698 or leopar 56112..

I´m going to work to France, were are you from !?

Best Regards

[Alfa Spirit]

Hello,
I live in the west side of Paris at Boulogne-Billancourt exactly.

What do you think about a Scorpion HK-4035 / 560kV with 10S or 12S?
Thanks

[gerardobrandao]

Hello

A 4035 in mine opinion is small for such a big boat....i had a 4035 800kv but it as in a rigger with 10S!
better would be a 5035....
im going to work no ennery and May be live in Pontoise....there is a huge lake there Cergy Pontoise!
May be whe can get in contact some day!

Keep in touch :-)

[gerardobrandao]

Hello

A 4035 in mine opinion is small for such a big boat....i had a 4035 800kv but it as in a rigger with 10S!
better would be a 5035....
im going to work no ennery and May be live in Pontoise....there is a huge lake there Cergy Pontoise!
May be whe can get in contact some day!

Keep in touch :-)

[Alfa Spirit]

Twin, single or twin?? .... Well here is the twin setup

What do you think?

[gerardobrandao]

Hello Alfa,,,

For that parte Hull i would go with longer cana motor...to me, The 4060 seems a small motor...May be someone could Chim here....


Best regards

Sent from my ASUS Transformer Pad TF300T using Xparent ICS Tapatalk 2

[Alfa Spirit]

The size of a TP Power 4060 is 40mm x 92mm

Powerboat P1 22.jpg

[iridebikes247]

You could go leopard 5698 720kv, found one here for 160 bucks...

http://kershawdesigns.com/BrushlessMotors-Leopard.htm

I just bought two 5692 730kv motors from kershaw, own 5 leopards now and all of them are well built. I would stay with inrunners just because they're easier to cool. I have run big outrunners and they always get too hot for me.

[dana]

ImageUploadedByTapatalk1355196779.625607.jpg