Motor mounting screws loose

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • gfm1135
    Senior Member
    • Aug 2012
    • 170
    #1

    Motor mounting screws loose

    The 2 screws for the motor mounting comes loose or comes out after each run. Any suggestions? Thanks!
    Tags: None
    • Gary
      Fast Electric Addict!
      • Jan 2009
      • 1105
      #2
      Really??? I will just throw a blanket reply out there. Make sure they are actually tight. Use loctite if they still come loose. But I would have to say that tha PROP or COLLET on whatever you could possibly have is WAY out of ballance causing this to happen. I have seen many times the motor screws themselves coming loose but not the mount screws.
      PT-45, 109mph, finally gave up after last bad crash
      H&M 1/8 Miss Bud 73 mph
      Chris Craft 16 mph

        Comment

        • gfm1135
          Senior Member
          • Aug 2012
          • 170
          #3
          It is the screws holding the motor to the mount.

            Comment

            • viper1
              Senior Member
              • Jun 2012
              • 218
              #4
              spring washers?
              Wisdom is knowing how little we know

                Comment

                Previous template Next
                Working...