Help with Rigger set up

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • fewilson
    Junior Member
    • Jan 2010
    • 3
    #1

    Help with Rigger set up

    Any help would be greatly appreciated.

    I have a 33" long x 23.6" wide fiberglass rigger (China/Poseidon)

    604852515_o.jpg

    My question is what motor should I use for this?

    I have a 6S 22.2V/4000Mah LiPo and Swordfish 120A-6s ESC.
    Tags: None
    • RaceMechaniX
      Fast Electric Addict!
      • Sep 2007
      • 2821
      #2
      Welcome to OSE fewilson,

      You will probably want to look for a motor with a kv between 1500-2000 for starters. You can go higher, but with a 120A speedo you will be limited. The 36mm diameter motors will fit better in the hull, so look at the leopard 3650 or 3674. You could also look at the Castle car motors such as the 1415 1.5Y if you can find one.

      A picture of the inside of the hull with battery and speedo in place will help estimate how much space you have for a motor.

      Tyler
      Tyler Garrard
      NAMBA 639/IMPBA 20525
      T-Hydro @ 142.94mph former WR

        Comment

        • Steven Vaccaro
          Administrator
          • Apr 2007
          • 8718
          #3
          Any pictures of the inside?

          Sent from my Xoom using Tapatalk 2
          Steven Vaccaro

          Where Racing on a Budget is a Reality!

            Comment

            • fewilson
              Junior Member
              • Jan 2010
              • 3
              #4
              Tyler,

              Thanks for the info. I am also discussing with Steve on selections.

                Comment

                • fewilson
                  Junior Member
                  • Jan 2010
                  • 3
                  #5
                  Steve,

                  I also sent you an email on this, but here is the inside pic from the manufacturer, I didn't have time to take pics last night.
                  605466387_o.jpg

                    Comment

                    • CornelP
                      Senior Member
                      • May 2009
                      • 745
                      #6
                      Search the net for builds of the Hydro&Marine Dr.Evil... it's a straight copy of that.

                        Comment

                        Previous template Next
                        Working...