Tweet
SJFE, thanks for all the reasearch & developement you have done.
i bought two HM200 amp escs and encapsulated one like on your 26 inch cat. the other i left as is on my twin 42 inch 13 pound twin geared/drive cat.
todays run on 18 mph winds and some chop still managed 41 mph on the X447 two bladers.
what was interesting were the temps. nimh cells were 115' , water cooled fiegao motors were 100' , as is esc 114' and the encapsulated esc was 106' .
the escs did not like the pistix adapter so removed it out.
and with the 4mm "O" rings on the teflon tube between the gap of stinger was a perfect fix. this time noot a spec of water was inside the hull.
again, thank you.
i bought two HM200 amp escs and encapsulated one like on your 26 inch cat. the other i left as is on my twin 42 inch 13 pound twin geared/drive cat.
todays run on 18 mph winds and some chop still managed 41 mph on the X447 two bladers.
what was interesting were the temps. nimh cells were 115' , water cooled fiegao motors were 100' , as is esc 114' and the encapsulated esc was 106' .
the escs did not like the pistix adapter so removed it out.
and with the 4mm "O" rings on the teflon tube between the gap of stinger was a perfect fix. this time noot a spec of water was inside the hull.
again, thank you.
Comment