Need to be able to connect two balancing plugs for data logging

[stifflkd]

Oscarel,

Are you with Eagletree? Can you PM me if you are? I would like to discuss this further.

Thanks

[oscarel]

No, I don't work with eagletree. Here's a link to where they frequent http://www.rcgroups.com/eagle-tree-systems-443/. billpa works with eagletree.

[1945dave]

Is this what you are looking for Dave?

http://www.hobbyking.com/hobbyking/s...5pcs_bag_.html

[ATTACH=CONFIG]86740[/ATTACH]

Yes Viper, that will work for my 6S setup, good find, now can you find the same thing for 4S (two 2S in 4S out).

Dave

[viper1]

Yes Viper, that will work for my 6S setup, good find, now can you find the same thing for 4S (two 2S in 4S out).

Dave

There's a challenge...

Here you go then: http://www.ebay.com/itm/230732523425

Now go and check your PM's !

[ray schrauwen]

Is this what you are looking for Dave?

http://www.hobbyking.com/hobbyking/s...5pcs_bag_.html

[ATTACH=CONFIG]86740[/ATTACH]

I use these. Just be careful of polarity of the packs you join in series!! I wrecked a balance board with a reverse polarity accident. No big spark but, that balance board is garbage now.

If the outside black wire on the balance cable is on the left, so should the Main packs Negative lead be on the left. If you reverse it you will hear a little pop. Ask me how I know....