Delta Force Vortex 22

[hypersmash]

Hello everyone. I am building a Delta Force Vortex 22 and I am trying to find nice hardware for it. I looked at the hardware from Offshore and I will admit I am not a big fan of the setup not the appearance. So I am looking for some recommendations or what I can run and where I can get it from. Thanks.

Steve
IMAG0664.jpg

[properchopper]

Steve,

There's lots of nice hardware out there. Here's one option : http://www.insaneboats.com/mm5/merch...E30HardwareKit

You get a strut with lead/teflon bushings, rudder (which can be trimmed shorter if need be), and turn fin with mounting bracket. We use this on the 30" FE30 - might be useable if you eventually get a larger hull.