Having Second thoughts move up or not..

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • thndrckn
    Junior Member
    • Aug 2012
    • 10

    #1

    Having Second thoughts move up or not..

    I currently own a Kysho Twinstorm, and i was wanting to get another and actually build one this time, but i keep going back and forth, so I though i would ask you guys, I am not looking to break any records but would like to run for fun, but when i get the need be able to run in the 60's I have decided that I would like a Cat over anything else, but what i am unsure of is what size of cat to get, Currently I run in small ponds/lakes now but would like to run when i go on vacations next summer(at places like the lake of the ozarks). I just cant decide to stay in the 36" range or should move up to the 40"+ range, so I am looking for suggestions or advice, this is a winter project so I'm not looking for to finish it in a hurry and i plan on doing it in stages and right now I am in the hull choice stage.


    Thanks in advance!
  • Make-a-Wake
    FE Rules!
    • Nov 2009
    • 5557

    #2
    Check out this 36" Cat: http://www.offshoreelectrics.com/pro...prod=df-Cat-36

    A Leopard 4092 on 6s2p will get this hull over 60. The 4092 in the 1730kv will give you mid 35,000 rpm range loaded, The 1480kv will obviously be a bit lower but you can swing more prop.

    http://www.offshoreelectrics.com/pro...o-4092&cat=148
    NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: http://forums.offshoreelectrics.com/...est!&highlight=

    Comment

    • thndrckn
      Junior Member
      • Aug 2012
      • 10

      #3
      That was one i was looking at, but i am still undecided on if i should go 36 or larger.. like the 41 fightercat or even bigger 43 conquest..

      Comment

      • Flying Scotsman
        Fast Electric Adict!
        • Jun 2007
        • 5190

        #4
        Buy an Insane FE 30 and build it....you we be astonished at the performance



        Douggie

        Comment

        Working...