Vantex audi r8 catamaran

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • JESTER
    Junior Member
    • May 2012
    • 11

    #1

    Vantex audi r8 catamaran

    I bought some time ago this catamaran: http://www.fuyuanrc.com/detail.asp?id=15703, Someone knows it, there are some reviews on it?
  • driftah
    Senior Member
    • Aug 2010
    • 760

    #2
    omg that is too funny bro.Its a cartamaran

    Comment

    • egneg
      Fast Electric Addict!
      • Feb 2008
      • 4670

      #3
      I remember when this boat was first posted - but I don't know of anyone that has one.
      IMPBA 20481S D-12

      Comment

      • Make-a-Wake
        FE Rules!
        • Nov 2009
        • 5557

        #4
        Whoa! Little different twist on the looks................... Big 50 incher too.

        If the bottom is up to snuff, its running a 'decent' motor 650kv, it outto go OK. The sponsons and business end dont care that there is a car on top LOL!
        Attached Files
        NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: http://forums.offshoreelectrics.com/...est!&highlight=

        Comment

        • iamandrew
          Senior Member
          • Jul 2010
          • 577

          #5
          ever noticed that with these boats, they have a picture of the outside of the boat, yet all the inside, or other pics are all generic pics of a compleatly difference boat?

          Comment

          • rcboatmanwithkids2880
            Senior Member
            • Aug 2008
            • 340

            #6
            Hi Guys ,

            I guess this peculiar looking Cat was developed for those that still want to hold onto their R/C Car Roots !!! Lol

            Brad
            Oz
            Roy Cooper's www.fastonwater.co.uk - Where Brittish Raceboat History Comes To Life !!!

            Comment

            • JESTER
              Junior Member
              • May 2012
              • 11

              #7
              Unfortunately, the ARR version has a brushless outrunner 650Kv http://fuyuanrc.com/en/detail.asp?id=16429 by pulling very little indeed accepts up to 7s. Because all the hardware is already in place, I do not want major changes to the hull, so I prepared for this cat a leopard 5692 by 540Kv motor with 10s, then I was advised to start a propeller from 60-62mm and finally found a speed controller HV 280A. We hope that everything will be fine and that I will reach a satisfactory speed!

              Comment

              • runzwithsizorz
                Senior Member
                • Jan 2009
                • 896

                #8
                Lets unwrap her, and have a look. http://www.youtube.com/watch?v=popP_...eature=related

                Comment

                • kevinpratt823
                  Fast Electric Addict!
                  • Aug 2012
                  • 1361

                  #9
                  Originally posted by runzwithsizorz
                  Does that canopy actually have "ventilation" fins in it?
                  My private off road rc track
                  https://www.youtube.com/watch?v=XC3H...yaNZNA&index=8

                  Comment

                  • JESTER
                    Junior Member
                    • May 2012
                    • 11

                    #10
                    I had already seen that video, I'd like to see it in action, but probably in the network are not there, oh well I'll set it up when I finish some videos!

                    Comment

                    • Skullcracken
                      Senior Member
                      • May 2010
                      • 617

                      #11
                      Originally posted by runzwithsizorz
                      Thats funny. You realize that video is the gfreakracing guys?

                      Comment

                      • Skullcracken
                        Senior Member
                        • May 2010
                        • 617

                        #12
                        Originally posted by JESTER
                        I had already seen that video, I'd like to see it in action, but probably in the network are not there, oh well I'll set it up when I finish some videos!
                        The "out of the box" non upgraded components should perform like this. This is the another fuyuan boat - Aqua Mania knockoff. Same size, same setup except different rudder. And unfortunately a "gfreak racing" video.

                        Comment

                        • JESTER
                          Junior Member
                          • May 2012
                          • 11

                          #13
                          Hi Skullcraken I saw that video too, but what is the right setup for my mono motor R8 cat? I think what I indicated above should be good ... hopefully!

                          Comment

                          • JESTER
                            Junior Member
                            • May 2012
                            • 11

                            #14
                            Hi kevinpratt823 the canopy has a grid of ventilation, but I wanted to close it because I think that with an electric is better, but since it is only recently that I look into the world of rc boats, clearly accept advice from those who have more experience than me. I think that the air intake is to be left open in the case of a combustion engine ... right?

                            Comment

                            • egneg
                              Fast Electric Addict!
                              • Feb 2008
                              • 4670

                              #15
                              Originally posted by JESTER
                              Hi kevinpratt823 the canopy has a grid of ventilation, but I wanted to close it because I think that with an electric is better, but since it is only recently that I look into the world of rc boats, clearly accept advice from those who have more experience than me. I think that the air intake is to be left open in the case of a combustion engine ... right?
                              Yes the vents are for IC, you want it water tight for FE.
                              IMPBA 20481S D-12

                              Comment

                              Working...