Fast way to stuff your tube under 3 min's

[justski]

I AM NEW TO RC BOATS BUT I ALWAYS LOOK FOR THE EASY WAY TO DO THINGS ..

i been reading trying to find a easy way to stuff the Teflon tubing in the brass tubing ...being i like to sew too here's what i came up with i took my Teflon tubing and cut it about 1 inch down 2 x so you have 4 pieces of Teflon fold them on top of each other and wrap them with a good nylon thread about 3ft long then take a needle and sew it pulling it real tight then i ran the thread down the tube put 2 drops of dish soap on it and pulled it slide in really easy here's a picture of what it looks like and yes it looks like a tampon..lol...DSCN5457.JPGDSCN5458.JPG

[steveo]

r u sure u have the right size teflon for the brass, this seems way to difficult the teflon should slide in without a problem

[justski]

this is what they tell me to use on OSE 9/32 brass .187 Teflon tubing.

[martin]

Some teflon is a bit oversize & wont go into the tube, ive had this a few times. Simple solution you stretch the teflon tube which reduces the o/d of the teflon & then slides staight into the stuffing tube easy.