Tweet
Hi Fella's, these were given to me from Mark Sholund & neither one of us know anything about them... Are these any good? Offers? Trade for a UL-1 type ESC...
IMG_0015.jpg HELP!
IMG_0015.jpg HELP!
-
-
I bet the ESC is pretty decent. Motor looks like a 2 pole "Feigao" type. Any vent holes in the endbells?NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE:
http://forums.offshoreelectrics.com/...est!&highlight= -
No holes in the enbell. Do you think the ESC would be fine in my JAE? I've got the UL-1 motor. Its says it's 200 amps.
Pretty new here, bear with me!! LOL...Comment
-
it could do the trick just fine for you...NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s
Comment
-
Those are fairly low end ESC's. Looks like someone took one pulled the heat shrink off and put a cooling plate on it.
Probably a $30-40 esc on E bay...42" Osprey, 32" Pursuit, 26" Bling Rocket (rescue), Blizzard Rigger, JAE 21FE rigger, Hobby King rigger (RIP)Comment
-
I had one on my T29 using a Medusa 3670 2300kv and a 42mm prop
I had no issues with that esc...NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8sComment
-
I tried to use the ESC on a 1/8 scale Buggy motor and I do not think I was over 100 amps and it burnt up. I ran the replacement on a 60Amp draw no problems.Comment
-
Did you see this thread about the esc? http://forums.offshoreelectrics.com/...ystery+200+ampComment
-
Good info! Thanks. Anyone want to trade this motor & speed control for an Aquacraft 60 amp ESC?Comment
-
the motor look like FSD 3674 - 2 pole .....Comment
-
yeah its a FSD for sure, looks like what i pulled out of the genesis hull when i got itComment
-
Suppo esc, fesuda 2 pole.
Nortavlag Bulc Comment
Comment