Need to clean inside of hull after esc melt down?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • larz001
    Senior Member
    • Jul 2012
    • 145

    #16
    i had one burn up awile ago and used Isopropyl alcohol to clean out the goo, but it still smelt really bad and was smelling up the garage, i removed the motor from the hull and put about 1/2 cup maxwell house coffee into the hull (not the instant stuff), i left it sit a couple days and dumped out the coffee and smell was totally gone
    proboat mystic, preditator outrigger, tt desparado jr, vac-u-vee jr, aqua craft top speed v2, dumas 1/8 scale hydro

    Comment

    • crrcboatz
      Senior Member
      • Jan 2009
      • 914

      #17
      Originally posted by larz001
      i had one burn up awile ago and used Isopropyl alcohol to clean out the goo, but it still smelt really bad and was smelling up the garage, i removed the motor from the hull and put about 1/2 cup maxwell house coffee into the hull (not the instant stuff), i left it sit a couple days and dumped out the coffee and smell was totally gone
      Grounds or liquid?

      Comment

      • jantagg
        Senior Member
        • Nov 2008
        • 187

        #18
        Go go your local grocery store and pick up a couple cans of CITRUS MAGEC and give the hull a couple good applications. It smells good and will cure the brunt ESC odor after you thoroughly clean the hull with alcohol. Every Castle owner should have a can or two handy.

        Comment

        • larz001
          Senior Member
          • Jul 2012
          • 145

          #19
          Originally posted by crrcboatz
          Grounds or liquid?
          dry grounds right from the cannister
          proboat mystic, preditator outrigger, tt desparado jr, vac-u-vee jr, aqua craft top speed v2, dumas 1/8 scale hydro

          Comment

          Working...