Esc Help!

[RichRC]

Hey Guys, i need some Advice, i have a Brushed motor---> Motor Specifications :
- Operating : 6 ~ 9.6V
- Current No Load : 1A
- RPM No Load : 9600

And i was hoping you guys could point me in the right direction on what ESC i should buy, and also what Prop and Rudder system would be good to use. my Hull is Pictured in my post " In the Deep End "
Any info is good info, as my build is stuck untill i can solve this little Dilema
Many Thanks RichRC

[Make-a-Wake]

I cant personally help you unless you state the motor size.............35 x 50mm, 36 x 57mm etc..............shouldnt need an ESC with more than a 50a capacity most likely

[RichRC]

Physical Dimention :
- Shaft Diameter : Ø3.15mm (0.13")
- Shaft Length : 18mm (0.71")
- Can Diameter : Ø36mm (1.42")
- Can Lenght : 61mm (2.4")
- Weight : 204g (7oz)
- Mounting Screws x2 : M3

[RichRC]

https://www.ebay.co.uk/itm/066-9600Rpm-550Brushed-Motor-1-10-Car-Boat-E-P-/200770282561?_trksid=p2045573.m2042&_trkparms=aid%3D111000%26algo%3DREC.CURRENT%26ao%3D1%26asc%3D27%26meid%3D2322981954376679166%26pid%3D100033%26prg%3D1020%26rk%3D1%26sd%3D200770282561%26

these are the motors ( i bought 2 lol)

[Make-a-Wake]

That motor wont pull more than about 12-15 amps propped correctly.

[ENCORE MAN]

Rich, your motor is most likely a 27 turn motor. The best value on the market IMHO would be a DURATRAX INTELLISPORT AUTO SPOTR at Tower Hobbies for $23. This esc will handle a 20 turn motor. The AUTOSPORT w/REVERSE IS $40 but it will handle a 18 turn motor and give you a little more leeway for larger prop sizes. Good luck BG

[jkr]

Many people on my scale forum say that this is the best esc.
It has 100% forward/reverse

http://www.ebay.com/itm/RC-Model-Ship-Boat-Waterproof-50A-R-C-Hobby-Brushed-Speed-Controller-ESC-SE081-/270974301222?pt=Radio_Control_Parts_Accessories&hash=item3f1753b426

[RichRC]

thanks guys i bought the Duratrax intellispeed F/R from a guy in Salt lake City ( maybe one of you guys lol )
always gratefull of Advice as always (pardon the Starwars reference) i am a humble Padowan Learner RichRC