Aquacraft revolt esc issues.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • stadiumyamaha
    Fast Electric Addict!
    • Apr 2011
    • 1284

    #1

    Aquacraft revolt esc issues.

    Seems like all I'm doing is lately is screwing around with esc,s.
    Anybody have any experience with a aquacraft esc not working? After I connect the batts all it does is beep every second and won't arm with the throttle. Any way to reset?
    The only way I can get it to respond is to push reverse, it will beep then pull the forward, it will beep and then reverse again until a final beep. At the point it will arm and the motor will start to run away.
    Bad esc or out of calibration?
    white geico w/2200kv 3674 leopard 53.5mph 4s2p, geico w/ 1800kv outrunner 52mph on 4s2p, genesis w/2200kv castle 53.8 on 4s2p, impulse 31 w/2200kv castle, stock p1 and ul-1
  • SirBudman32
    Senior Member
    • Aug 2011
    • 625

    #2
    set throttle trim to max and recalibrate.
    Modified Jae21, Stock Jae21, Cheetah, Ul-1, Shock Wave 26 V2 (Rescue Boat).

    Comment

    • stadiumyamaha
      Fast Electric Addict!
      • Apr 2011
      • 1284

      #3
      I'll try that. Thanks
      white geico w/2200kv 3674 leopard 53.5mph 4s2p, geico w/ 1800kv outrunner 52mph on 4s2p, genesis w/2200kv castle 53.8 on 4s2p, impulse 31 w/2200kv castle, stock p1 and ul-1

      Comment

      • stadiumyamaha
        Fast Electric Addict!
        • Apr 2011
        • 1284

        #4
        Your the man. Worked perfectly.
        I don't have much experience with these esc's. I should have thought to do that.
        white geico w/2200kv 3674 leopard 53.5mph 4s2p, geico w/ 1800kv outrunner 52mph on 4s2p, genesis w/2200kv castle 53.8 on 4s2p, impulse 31 w/2200kv castle, stock p1 and ul-1

        Comment

        • SirBudman32
          Senior Member
          • Aug 2011
          • 625

          #5
          No problem, Glad it worked for you.
          Modified Jae21, Stock Jae21, Cheetah, Ul-1, Shock Wave 26 V2 (Rescue Boat).

          Comment

          Working...